Furnish and install 48' In ft. of 8'+1H chain link fence and (1) double leaf manual swing gate. New fence to be attached to the existing fence in the SHU area over the walking path. Fence to be constructed of 4" diameter SS40 line, gate and end posts, 1 5/8" diameter top and bottom rail and 1 5/8" mid rail brace with truss rods at terminal posts. Fence to be covered with 2" x 9ga x 8' H aluminized chain link fabric, brown privacy slats and topped with 30" Super Maze coil razor wire. All posts to be set in 18"x54" concrete footing. Gate to be constructed of 2" diameter SS40 pipe steel, covered with 2" x9ga x 8'h aluminized chain link fabric, brown privacy slats and topped with 30" Super Maze coil razor wire.

Furnish and install 365' ln. ft. of single row 30" Super Maze coil razor wire along the existing 8'H chain link fence in the SHU area of the facility. All existing top rail will need to be removed in order to install post extensions and barb arms. Top rail will need to be re-installed as new barb arms are attached.

Remove 1 of 2 existing 11'w gate leafs located perpendicular to the roadway. The leaf to be removed is the leaf on the left facing into the enclosed cage area. This opening will be replaced with an 8'h+1x11'wide panel and 4" diameter SS40 latch posts for the remaining leaf. The fencing will be installed with brown privacy slats, barb arms and topped with 30" Super Maze coil razor wire. Gate post to be set in 18"x54" concrete footing.

Furnish and install 100' Ln ft. of 30" Super Maze coil razor wire to be installed along top of pen. Wire to be installed by welding 45 deg. angle barb arms to top of pen, installing single line of barb wire and attaching coils.

Contractor will service/warranty any fencing issues to the installation of the new SHU Security Fence.