Single door holding and transport heated cabinets for correctional use, Full-Size. Accepted model must satisfy pre-approved security safety standards for utilization in a correctional setting. Include in your quote only the security options requested.

FWE Model #UHST-12-NYDOC--NO SUBSTITUTIONS

Minimum Specifications:

-Lockable transport latch.

-Tamper proof fasteners with security screwdriver bit.

-Top mounted heating system with top mounted controls.

-Fully insulated.

-Removable tray slide.

-Adjustable thermostat with security cover solid (locking metal control cover with cut out access to on/off switch).

-Heating system must be able to maintain product at minimum of 165°. All exterior vents must be covered to prevent water damaging the control panel.

-Heavy duty 5’’ casters (2) swivel with brakes and (2) stationary.

-270° door swing with stopper.

-Full perimeter bumper.

-Magnetic door closure (gasket-less door with hidden magnetic door closure).

-Fully welded door hinges (2) or full-length hinge.

-Utility 120volts, single phase, maximum 20 amps (Nema 8’cord 5-15p).

-UL/NSF certified.

-Rear handle(s) for easy maneuverability.

-Cabinet construction material: anodized aluminum or stainless steel-minimum 20-gauge exterior.

-Approximate exterior dimensions: 28’’wide x 34’’deep x 72’’high.

-Racking configuration (tray slide): Minimum 12 shelves spaced 4.5’’ apart.

-Holding capacity: Minimum 24-4x12x20 pans and 12-18x26 sheet pans.