New York Bids > Bid Detail

AirScience Lab Equipment - NY State Police

Agency: The New York State Contract Reporter
Level of Government: State & Local
Category:
  • 66 - Instruments and Laboratory Equipment
  • 84 - Clothing, Individual Equipment, and Insignia
Opps ID: NBD15621512962330972
Posted Date: May 4, 2023
Due Date: May 25, 2023
Source: https://www.nyscr.ny.gov/ifram...
Issue Date: 05/04/2023 Contract Number: TBD
AirScience Lab Equipment - NY State Police
Description:

This Request for Quote (RFQ) is pursuant to the agency's discretionary purchasing authority of up to $85,000 under State Finance Law Article 11, Section 163 (6).

The New York State Police (NYSP) is soliciting quotes for the purchase of the following AirScience products:

Safedevelop Heat and Humidity Chamber for DFO/Ninhydrin Processing:
This unit provides a controlled environment for processing prints. Incorporates a heating element & built-in humidifier. Triple pane glass door that is heated when the humidifier is activated to prevent fogging. Individual heat and humidity controls allow user to adjust for various chemicals, such as DFO (100°C) and Ninhydrin (80°C, 65%RH). Built-in timer with alarm to alert user when cycle has completed. LED lighting on both sides of door. 110-130V, 60Hz.
Quantity Part # Description
2 (1 per Troop) SD-34S-A Safedevelop, 115v
2 (1 per Troop) VB60-A Fume extractor with GP filter
Each Unit Includes:
•Water carboy and tubing for clean water entry and wastewater disposal
•Low water level indicator
•Individual controls for heat and humidity can be set to user specifications
•Removable shelves with perforated surface to promote circulation
•Removable hanging rods and clips
•Leveling feet to mount cabinet
•Exhaust port to vent fumes into fume extractor, ductwork, or adjacent fume hood
•Triple pane glass door
•Locking T-handle to preserve chain-of-custody
•LED lighting
•Circulation fan promotes uniform distribution of heat and humidity.

Evidence Bench:
Constructed of a welded steel frame with a powder coated finish. Locking castors allow for easy movement of the bench. Locking storage drawers for tools and other supplies. Open steel shelf under the top allows for placement of larger items. The epoxy resin work surface resists chemicals and has a mounted Kraft paper dispensing station.
Quantity Part # Description
4 (2 per Troop) EVB-72-A 72” wide, 115v
Each Unit includes:
•Epoxy work top •Locking castors
•Kraft paper dispenser with paper •2 lockable storage drawers

Custom Downflow Workstation:
Downflow workstation with blowers and filters integrated into the lower base section. Work area enclosure made with metal frame and clear panels. Perforated stainless steel work surface allows for easy cleaning. Lockable casters allow for ease of mobility. 110v, 60Hz
Quantity Part # Description
2 (1 per Troop) Custom DWS72-MOBILE
Each Unit Includes:
•External speed controller for the blower and low airflow indicator
•Pre-filters for larger particulates •Task lighting
•HEPA filters for fine particulates and powders •Lockable casters
•Hinged sash on upper enclosure •Duplex outlet w/separate power cord

Please note:

  • Substitutions will not be accepted. Quoted items must be AirScience and as described above.
  • The NYSP intends to make a one-time purchase with the authorized reseller/distributor who provides the lowest quote.
  • Quotes must be itemized to show the unit price per item. Shipping charges, if applicable, must be a separate line item.
  • Evidence benches may be increased from a quantity of 4 to 6 at a later date.
  • Items will be shipped to:

Troop K Headquarters (To be delivered in October 2023)

SP Poughkeepsie
2541 Route 44
Salt Point, NY 12578

Troop A Headquarters (To be delivered in July 2024)

SP Batavia
4525 West Saile Drive
Batavia, NY 14020

Inquiries and quotes shall be submitted to Contracts@troopers.ny.gov with the subject line "AirScience Lab Equipment Quote".

Due Date: 05/25/2023 4:00 PM

Contract Term: One Time Purchase

Location: Troop A (Batavia NY) and Troop K (Poughkeepsie NY)

Ad Type: Discretionary procurements between $50,000 and $500,000

Primary Contact: Police, NYS Dept. of
Purchasing Department
Finance
Amber Guynup
Contract Management Specialist
1220 Washington Avenue
State Campus, Building 22
Albany, NY 12226-2252
United States
Ph: 518-457-7240
Fax:
Amber.Guynup@troopers.ny.gov
Secondary contact: Police, NYS Dept. of
Purchasing Department
Finance
Amber Guynup
Contract Management Specialist
1220 Washington Avenue
State Campus, Building 22
Albany, NY 12226-2252
United States
Ph: 518-457-7240
Fax:
Amber.Guynup@troopers.ny.gov
This unit provides a controlled environment for processing prints. Incorporates a heating element & built-in humidifier. Triple pane glass door that is heated when the humidifier is activated to prevent fogging. Individual heat and humidity controls allow user to adjust for various chemicals, such as DFO (100°C) and Ninhydrin (80°C, 65%RH). Built-in timer with alarm to alert user when cycle has completed. LED lighting on both sides of door. 110-130V, 60Hz. Constructed of a welded steel frame with a powder coated finish. Locking castors allow for easy movement of the bench. Locking storage drawers for tools and other supplies. Open steel shelf under the top allows for placement of larger items. The epoxy resin work surface resists chemicals and has a mounted Kraft paper dispensing station. Downflow workstation with blowers and filters integrated into the lower base section. Work area enclosure made with metal frame and clear panels. Perforated stainless steel work surface allows for easy cleaning. Lockable casters allow for ease of mobility. 110v, 60Hz

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >